SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Adjust the operating rod of brake booster.

Standard L:

144.6 mm (5.69 in)

If it is not within specified value, adjust it by adjusting the brake booster operating rod.


Mount the brake booster in position.

Connect the operating rod to brake pedal with clevis pin and snap pin.


(1)

Nuts

(2)

Clevis pin

(3)

Snap pin

(4)

Operating rod



Connect the vacuum hose to brake booster.


Mount the master cylinder onto brake booster.

Connect the brake pipes to master cylinder.

Connect the electric connector for brake fluid level indicator.

Measure the clearance between threaded end of stop light switch and stopper.If it is not within specified value, adjust it by adjusting the position of stop light switch.

If it is not within specified value, adjust it by adjusting the position of stop light switch.

Important

Be careful not to rotate the stop light switch.


Stop light switch clearance A:

0.3 mm (0.012 in)


Apply grease to operating rod connecting pin to prevent it from wearing.

Bleed air from the brake system.

Tightening torque (Air bleeder screw):

8 Nm (0.8 kgf-m, 5.8 ft-lb)

Conduct road tests to ensure brakes do not drag.