INSTALLATION
| INSTALLATION |
| Note | ||
|
Airbag system wiring harness is routed near the center brake pipe. |
| Important | ||
| • |
All airbag system wiring harness
and connectors are colored yellow. Do not use electrical test equipment
on these circuits.
|
|
| • |
Be careful not to damage the airbag system wiring harness
when servicing the center brake pipe.
|
|
| • |
When installing the brake pipe, make sure that it is
not bent.
|
|
| • |
After installing the brake pipe and hose, bleed the
air.
|
|
| • |
After installing the brake hose, make sure that it does
not touch the tire or suspension assembly, etc.
|
|
Brake pipe tightening torque:
15 Nm (1.5 kgf-m, 10.8 ft-lb)
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
