SAAB WIS ONLINE

REMOVAL

REMOVAL

15 INCH TYPE & 16 INCH TYPE

Set the vehicle on a lift.

Loosen the wheel nuts.

Lift-up the vehicle, and then remove the front wheel.

Remove the lower caliper bolt.

Raise the caliper body upward and support it.

Note

Do not disconnect the brake hose from caliper body.


Remove the pad.


Note

If the brake pad is difficult to remove, proceed as follows:


Remove the caliper body from support.

Remove the support.

Place a support in a vise between wooden blocks.


(1)

Support

(2)

Wooden blocks



Attach a rod of less than 12 mm (0.47 in) dia. to the shaded area of brake pad, and strike the rod with a hammer to drive brake pad out of place.