SAAB WIS ONLINE

ASSEMBLY

ASSEMBLY

15 INCH TYPE & 16 INCH TYPE

Clean the caliper body interior using brake fluid.

Apply a coat of brake fluid to the piston seal and fit piston seal in groove on caliper body.

Apply a coat of brake fluid to the entire inner surface of cylinder and outer surface of piston.

Apply a coat of specified grease to the boot and install the piston boot to the groove on ends of cylinder.

Grease:

NIGLUBE RX-2 (Part No. 32005002)

Insert the piston into cylinder.

Important

Do not force the piston into cylinder.



(1)

Piston

(2)

Piston boot



Position the boot in grooves on cylinder and piston.


(1)

Piston

(2)

Piston boot

(3)

Caliper body

(4)

Piston seal



Apply a coat of specified grease to the lock pin and guide pin outer surface, cylinder inner surface, and boot grooves.

Grease:

NIGLUBE RX-2 (Part No. 32005002)

Install the lock and guide pin boot on support.


(1)

Pin boot

(2)

Lock pin or guide pin

(3)

Apply grease.