REMOVAL
| REMOVAL |
| 15 INCH TYPE & 16 INCH TYPE |
Set the vehicle on a lift.
Loosen the wheel nuts.
Lift-up the vehicle, and then remove the front wheel.
Remove the caliper body and support from housing, and suspend it from strut using a wire.
| Note | ||
|
If the disc rotor seizes up within the hub, drive the disc rotor out by installing an 8-mm bolt in holes (B) on rotor. |
Clean mud and foreign particles from the caliper body assembly and support.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
