ASSEMBLY
| ASSEMBLY |
Apply recommended brake fluid to the inside wall of cylinder, and to outer surface of the piston assembly.
Ensure that the inside wall of cylinder, and piston assembly are free from dirt when assembling. Install the primary piston assembly and secondary piston assembly, while taking care not to damage, scratch, or dent the cylinder inside wall, and piston assembly.
Install the cylinder pin while pushing in primary piston by screwdriver which wrapped with tape.
Install the piston retainer, and then secure it by pressing the pawl.
|
(1)
|
Seal
|
Install the reservoir tank to master cylinder and secure with pin.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
