INSTALLATION
| INSTALLATION |
| 14 INCH TYPE |
Apply a thin coat of Molykote AS880N (Part No. 32005001) to the frictional portion between pad and pad clip.
Install the pad on support.
Install the caliper body on support.
Tightening torque:
37 Nm (3.8 kgf-m, 27.5 ft-lb)
| Note | ||
|
If it is difficult to push the piston during pad replacement, loosen air bleeder to facilitate work. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
