SAAB WIS ONLINE

ASSEMBLY

ASSEMBLY

14 INCH TYPE

Clean the caliper body interior using brake fluid.

Apply a coat of brake fluid to the piston seal and fit piston seal in groove on caliper body.

Apply a coat of brake fluid to the entire inner surface of cylinder and outer surface of piston.

Insert the piston into cylinder.

Important

Do not force piston into cylinder.


Apply a coat of specified grease to the boot and fit in groove on ends of cylinder and piston.

Grease:

NIGLUBE RX-2 (Part No. 32005002)

Install the piston boot to caliper body, and then attach boot ring.


(1)

Piston boot

(2)

Boot ring

(3)

Piston seal

(4)

Caliper body



Apply a coat of specified grease to the guide pin, outer surface, sleeve outer surface, cylinder inner surface, and boot grooves.

Grease:

NIGLUBE RX-2 (Part No. 32005002)


(1)

Pin boot

(2)

Lock pin or guide pin

(3)

Apply grease.



Install the guide pin boot on support.

Install the lock pin boot on support, and then insert the lock pin sleeve into place.