SAAB WIS ONLINE

DISASSEMBLY

DISASSEMBLY

14 INCH TYPE

Remove the boot ring.


(1)

Boot ring



Remove the piston boot.


Place a wooden block in caliper body as shown in the figure to prevent the piston from jumping out and avoid being damaged.

Gradually supply compressed air via the installation hole of brake hose to force the piston out.


(1)

Place a 30 mm (1.18 in) wide wooden block here.



Remove the piston seal from caliper body cylinder.

Important

Do not damage the cylinder and piston seal groove.



Remove the lock pin sleeve and boot from caliper body.

Remove the guide pin boot.