CAUTION
| CAUTION |
| • |
Wear working
clothing, including a cap, protective goggles, and protective shoes
during operation.
|
|
| • |
Before removal, installation or disassembly, be sure
to clarify the failure. Avoid unnecessary removal, installation,
disassembly and replacement.
|
|
| • |
Be careful not to burn your hands, because each part
on the vehicle is hot after running.
|
|
| • |
Use genuine power steering fluid, grease etc. or the
equivalent. Do not mix steering fluid, grease etc. with that of
another grade or from other manufacturers.
|
|
| • |
Be sure to tighten fasteners including bolts and nuts
to the specified torque.
|
|
| • |
Place shop jacks or rigid racks at the specified points.
|
|
| • |
Before securing a part on a vise, place cushioning material
such as wood blocks, aluminum plate, or shop cloth between the part
and the vise.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
