INSPECTION
| INSPECTION |
Check the power steering fluid for deterioration or contamination. If the fluid is highly deteriorated or contaminated, drain it and refill with new fluid.
Check the joints and units for oil leakage. If any oil leaks are found, repair or replace the applicable part.
Inspect the fluid level on flat and level surface with engine “OFF” by indicator of reservoir tank.
If the level is at MIN. point or below, add fluid to keep the level in the specified range of the indicator. If at MAX. point or above, drain fluid by using a syringe or the like.
Check at power steering fluid temperature 20°C (68°F); read the fluid level on the “COLD” side.
Check at power steering fluid temperature 80°C (176°F); read the fluid level on the “HOT” side.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
