REMOVAL
| REMOVAL |
Remove the air intake duct.
Drain fluid from the reservoir tank.
Disconnect the pipe D from return hose and suction hose from oil pump.
| Important | ||
| • |
Do not allow fluid from the
hose end to come into contact with pulley belt.
|
|
| • |
To prevent foreign matter from entering the hose and
pipe, cover the open ends of them with a clean cloth.
|
|
|
(1)
|
Suction
hose
|
|
(2)
|
Pipe D
|
|
(3)
|
Return
hose
|
Remove the reservoir tank from bracket by pulling it upwards.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
