SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Install in the reverse order of removal.

Note

Always tighten the bushing when tires are in full contact with the ground and vehicle is curb weight.


Tightening torque:

Transverse link bushing to crossmember:

125 Nm (12.7 kgf-m, 92 ft-lb)

Stabilizer to bushing:

25 Nm (2.5 kgf-m, 18.1 ft-lb)

Tie-rod end to housing:

27.0 Nm (2.75 kgf-m, 19.9 ft-lb)

Front cushion rubber to crossmember:

85 Nm (8.7 kgf-m, 62.7 ft-lb)

Universal joint to pinion shaft:

24 Nm (2.4 kgf-m, 17.4 ft-lb)

Crossmember to body:

105 Nm (10.7 kgf-m, 77 ft-lb)

Purge air from the power steering system.

Check the wheel alignment and adjust if necessary.