SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Install in the reverse order of removal.

Note
• Install the bushing (on front crossmember side) while aligning it with paint mark on stabilizer.

• Ensure that bushing and stabilizer have the same identification colors when installing.



(1)

Mark stamped on stabilizer

(2)

Bushing identification color



Always tighten the bushing location when tires are in full contact with the ground and vehicle is curb weight.

Tightening torque:

Jack-up plate to crossmember:

20 Nm (2.0 kgf-m, 14.5 ft-lb)

Stabilizer link to front transverse link:

30 Nm (3.1 kgf-m, 22 ft-lb)

Stabilizer to crossmember:

25 Nm (2.5 kgf-m, 18.1 ft-lb)