SAAB WIS ONLINE

INSPECTION

INSPECTION

Check the disassembled parts for cracks, damage and wear, and replace with new parts if defective.

DAMPER STRUT

Check for oil leakage.

Move the piston rod up and down to check that it operates smoothly without any binding.

Play of piston rod


• Measure the play as follows:

Fix outer shell and fully extend the rod. Set a dial gauge at the end of rod: L [10 mm (0.39 in)], then apply a force of W [20 N (2 kgf, 4 lb)] to threaded portion. With the force of 20 N (2 kgf, 4 lb) applied, read dial gauge indication: P 1 . Apply a force of 20 N (2 kgf, 4 lb) in the opposite direction of “W”, then read dial gauge indication: P 2 .


Limit of play (P 1 + P 2 ):

0.8 mm (0.031 in)

If the play is greater than limit, replace the strut.


STRUT MOUNT

Check the rubber part for creep, cracks and deterioration, and replace it with a new one if defective.

DUST COVER

If any cracks or damage are found, replace it with a new one.

COIL SPRING

One having permanent strain should be replaced with a new one. When the vehicle posture is uneven, although there are no considerable reasons like tire puncture, uneven loading, etc., check the coil spring for its free length referring to specifications, cracks, etc., and replace it with a new one if defective.

HELPER

Replace it with a new one if cracked or damaged.