ASSEMBLY

ASSEMBLY

FRONT BUSHING

Assemble in the reverse order of disassembly.

Important
Install the front bushing in correct direction, as shown in the figure.

(1)	Face bushing toward center of ball joint
(2)	Ball joint
(3)	±3°

REAR BUSHING

Install the rear bushing to transverse link, and then align the aligning marks scribed on the two.

Tighten the new self-locking nut.

Note
While holding the rear bushing so as not to change position of aligning marks, tighten the self-locking nut.

Tightening torque:

190 Nm (19.4 kgf-m, 140 ft-lb)