ASSEMBLY
| ASSEMBLY |
Use the same ST that was used during disassembly.
If it is difficult to press the bushing into trailing link, apply water-diluted TIRE LUBE to the inner surface of ST as a lubricant.
Specified lubricant:
TIRE LUBE: water = 1: 3
Using the ST, press the bushing into place.
|
(1)
|
Press
|
|
(2)
|
Bushing
|
|
(3)
|
Lateral
link
|
Press the ST plunger until bushing flange protrudes beyond lateral link.
|
(1)
|
Press
|
|
(2)
|
Plunger
|
|
(3)
|
Lateral
link
|
|
(4)
|
Flange
|
Turn the lateral link upside down. Press the ST plunger in opposite direction that outlined in the former procedure until bushing is correctly positioned in trailing link.
|
(1)
|
Press
|
|
(2)
|
Plunger
|
|
(3)
|
Lateral
link
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
