SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Secure the strut mount to vehicle body using a new self-locking nut.

Tightening torque:

20 Nm (2.0 kgf-m, 14.5 ft-lb)

Secure the rear strut to housing using a new self-locking nut.

Tightening torque:

200 Nm (20.0 kgf-m, 145 ft-lb)

Install the brake hose to lower side of strut, then insert the brake hose clip.

Important
• Check the hose clip is positioned properly.

• Check the brake hose for twisting, or excessive tension.

• Do not subject the ABS wheel speed sensor harness to excessive tension.


Lower the vehicle and tighten wheel nut.

Tightening torque:

90 Nm (9.2 kgf-m, 66 ft-lb)

Install the strut cap to rear quarter trim.

Note

Check the wheel alignment and adjust if necessary.