SAAB WIS ONLINE

ASSEMBLY

ASSEMBLY

FRONT BUSHING

Using the ST, press the bushing into trailing link.

ST 32005221 INSTALLER & REMOVER SET

Important

Turn the ST plunger upside down and press it until the plunger end surface contacts the trailing link end surface.



(1)

Press

(2)

Front bushing

(3)

Trailing link



Important

Install the front bushing in the proper direction, as shown in the figure.



(1)

Front

(2)

±5°



REAR BUSHING

Using the ST, press the bushing into trailing link.

ST 32005222 INSTALLER & REMOVER SET

Note

If it is difficult to press the bushing into trailing link, apply water-diluted TIRE LUBE to the inner surface of ST as a lubricant.


SPECIFOED lubricant:

TIRE LUBE: water = 1: 3


(1)

Press



Press the ST plunger until the bushing flange protrudes beyond trailing link.

ST 32005222 INSTALLER & REMOVER SET


(1)

Plunger

(2)

Flange



Turn the trailing link upside down. Press the ST plunger in the opposite direction that outlines in the former procedure until bushing is correctly positioned in trailing link.

ST 32005222 INSTALLER & REMOVER SET


(1)

Press

(2)

Plunger



Install the housing.