REMOVAL
| REMOVAL |
Apply parking brake, and position the select lever to “P” or “LOW”.
Set jacks or a lift to the specified point, and support the vehicle with its tires slightly contacting the floor.
Loosen the wheel nuts.
Raise the vehicle until its tires take off the ground using a jack or a lift.
Remove the wheel nuts and wheels.
| Note | ||
| • |
While removing the wheels, prevent the hub bolts from
damage.
|
|
| • |
Place the wheels with their outer sides facing upward
to prevent the wheels from damage.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
