SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Important

Before working on the airbag module, refer to the “CAUTION” in General Description.


Ensure there are no foreign particles on side airbag module.

Install the side airbag module (A) to backrest frame assembly.

Tightening torque:

5.9 Nm (0.59 kgf-m, 4.4 ft-lb)


Install the side airbag harness to backrest frame assembly.

Note

Secure the harness to its original position of seat.



Install the backrest cover.

Install the side airbag harness to slide rail IN (A), and then secure the connector to the bracket on the back side of seat cushion assembly.


Recline the seat or slide it backward and forward. Check there is no contact between seat backrest assembly, cushion cover assembly and side airbag harness.