SAAB WIS ONLINE

LOCATION

LOCATION

Note
• Datum points are specified for body repair.

• Guide holes, locators, and indents are provided to facilitate panel replacement and to increase alignment accuracy.

• Both right and left reference points are symmetrical.


FRONT


(1)

Radiator attaching hole 12 mm (0.47 in) dia. (Symmetrical)

(10)

Bracket module CTR-GH 6 mm (0.24 in) dia. (Vehicle center)

(24)

Roof panel repair locator hollow

(62)

Belt anchor attaching hole 11 mm (0.43 in) dia. (Symmetrical)

(2)

Fender attaching hole 7 mm (0.28 in) dia. (Symmetrical)

(12)

Front glass attaching hole RH 6.5 mm (0.256 in) dia. LH 6.5 × 10 mm (0.256 × 0.39 in) dia.

(70)

Trim clip attaching hole 8.5 mm (0.335 in) dia. (Symmetrical)

(3)

Fender attaching hole 10 mm (0.39 in) dia. (Symmetrical)

(18)

Fender attaching hole 12 mm (0.47 in) dia. (Symmetrical)

(71)

Harness clip attaching hole 7 mm (0.28 in) dia. (Symmetrical)

(4)

Hood hinge attaching hole 12 mm (0.47 in) dia. (Symmetrical)

(19)

Fender attaching hole 12 mm (0.47 in) dia. (Symmetrical)

(73)

Harness clip attaching hole 7 mm (0.28 in) dia. (Symmetrical)

(5)

Radiator panel side gauge hole 20 mm (0.79 in) dia. (Symmetrical)

(20)

Outer panel center pillar gauge hole 12 mm (0.47 in) dia. (Symmetrical)

(74)

Trim clip attaching hole 10 mm (0.39 in) dia. (Symmetrical)

(7)

Fender attaching hole 11 mm (0.43 in) dia. (Symmetrical)

(75)

Insulator attaching hole 8 mm (0.31 in) dia. (Symmetrical)

(8)

Gauge hole 12 mm (0.47 in) dia. (Symmetrical)

(21)

Outer panel center pillar gauge hole 12 mm (0.47 in) dia. (Symmetrical)

(9)

Front suspension crossmember attaching hole 12.4 mm (0.488 in) dia. (Symmetrical)

(22)

Weather strip patch attaching hole 5.2 mm (0.205 in) dia. (Symmetrical)



REAR


(30)

Child anchor attaching hole 11 mm (0.43 in) dia.

(33)

Two striker attaching hole 15 mm (0.59 in) dia.

(67)

Gusset floor rear side gauge hole 11.5 mm (0.453 in) dia. (Symmetrical)

(31)

Washer hose attaching hole LH 7 mm (0.28 in) dia.

(58)

Rear bumper plate nut attaching hole 13 mm (0.51 in) dia. (Symmetrical)

(72)

Trim upper clip attaching hole 8.5 mm (0.335 in) dia. (Symmetrical)

(32)

Rear combination light mounting hole 7 mm (0.28 in) dia. (Symmetrical)

(65)

Floor mat clip attaching hole 8 mm (0.31 in) dia.

(77)

Harness clip attaching hole 7 mm (0.28 in) dia. (Symmetrical)



UNDERBODY


(80)

Radiator lower frame gauge hole 12 mm (0.47 in) dia. (Symmetrical)

(85)

Transmission mount attaching hole 14 mm (0.55 in) dia.

(90)

Strut mount attaching hole 9.5 mm (0.374 in) dia. (Symmetrical)

(86)

Side frame gauge hole 18 mm (0.71 in) dia. (Symmetrical)

(91)

Strut mount attaching hole 10 mm (0.39 in) dia. (Symmetrical)

(81)

Side frame gauge hole 20 mm (0.79 in) dia. (Symmetrical)

(92)

Sub frame attaching hole 16 mm (0.63 in) dia. (Symmetrical)

(87)

Rear differential attaching hole 16 mm (0.63 in) dia. (Symmetrical)

(82)

Front crossmember attaching hole 12.4 mm (0.488 in) dia. (Symmetrical)

(88)

Rear suspension attaching hole 16 mm (0.63 in) dia. (Symmetrical)

(93)

Bumper beam attaching hole RH 15 mm (0.59 in) dia. LH 19 × 15 mm (0.75 × 0.59 in) dia.

(83)

Suspension attaching hole 17 mm (0.67 in) dia. (Symmetrical)

(89)

Rear side frame gauge hole 15 mm (0.59 in) dia. (Symmetrical)

(94)

Side frame gauge hole 15 mm (0.59 in) dia. (Symmetrical)

(84)

Side frame gauge hole 20 mm (0.79 in) dia. (Symmetrical)