REPLACEMENT
| REPLACEMENT |
Remove the outer mirror assembly.
Warm the area around the mirror holder (A) with a hair drier until the edges of the mirror holder become soft (about 2 or 3 minutes with a 1,000 W drier).
Use a flat tip screwdriver without sharp edges to lift the mirror out of the mirror holder (A).
Warm the area around the mirror holder with a hair drier until the edges of the mirror holder become soft (about 2 or 3 minutes with a 1,000 W drier).
Connect the mirror heater connector. (Model with mirror heater)
Remove the backing of the new double-stick tape, and push the mirror in to install it.
| Note | ||
|
Unless the mirror holder is warmed sufficiently, the mirror holder edges may be damaged or the mirror cracked. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
