IN-VEHICLE SENSOR

/ 9-2X (9346) / 2005 / 8. Body / HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) / Diagnostic Procedure for Sensors / Fault diagnosis, fault codes / IN-VEHICLE SENSOR

TROUBLE SYMPTOM:

•	When turning the AUTO switch to ON, blower fan speed, outlet port and inlet port is not changed.

•	If the switch LED indicates that the sensor is malfunctioning, replace the auto A/C control module. The in-vehicle sensor is built into the auto A/C control module and cannot be replaced as a single unit.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.