SAAB WIS ONLINE

CAUTION

CAUTION

Never connect the battery in reverse polarity.

The Auto A/C control module will be destroyed instantly.

Do not disconnect the battery cables while the engine is running.


• A large counter electromotive force will be generated in the alternator, and this voltage may damage electronic parts such as auto A/C control module.


Before disconnecting the connectors of each sensor and the auto A/C control module, be sure to turn off the ignition switch.


• The auto A/C control module may be damaged.


Every A/C-related part is a precision part. Do not drop them.

Airbag system wiring harness is routed near the A/C control panel (auto A/C control module) and junction box.

Important
• All airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuits.

• Be careful not to damage the airbag system wiring harness when servicing the A/C control panel (auto A/C control module) and junction box.