CAUTION

CAUTION

•

Before starting, turn the ignition switch to OFF, disconnect the battery ground cable and wait for 20 seconds or more.

•

The pretensioner system has a backup power source. The pretensioner might deploy if you do not wait for 20 seconds or more before starting work.

•

Do not drop or apply any impact to the pretensioner.

•

If oil, grease, or water gets on the pretensioner, wipe it off immediately with a dry cloth.

•

Do not expose the pretensioner to high temperature or flame.

•

Do not allow current to flow through or voltage to reach the pretensioner. Do not use a circuit tester to check resistance of the pretensioner.

•

Do not disassemble or attempt to repair the pretensioner. If it is dented, cracked, or deformed, replace it with a new one.

•

Do not use the airbag or pretensioner parts from other vehicles. Always replace parts with new parts.

•

When handling a seat belt with a deployed pretensioner, wear gloves and goggles. Wash your hands afterwards.

•

Do not re-use a seat belt with a deployed pretensioner again.

•

If the material gets in your eyes or on your skin during deployment, wash it away with clean water, and then consult a doctor.