DISASSEMBLY

DISASSEMBLY

DRIVER’S SEAT

Standard seat

Remove the seat from vehicle.

Remove the seat lifter cover using a flat tip screwdriver or equivalent, and then loosen the inside bolt to remove seat lifter lever.

Remove the reclining lever and seat hinge outer cover.

Remove the seat hinge inner cover.

Remove two bolts from reclining hinge on each side.

Remove the hook at bottom of backrest.

Open the zipper behind of backrest.

Remove the hog rings (A) of backrest cover.

Remove the hog rings (A) which secure the backrest cover and backrest pad.

Remove the headrest bushes.

Note
Push the headrest bushes to outside of seat from inside, and then remove them.

Pull out the backrest frame.

Remove the hog rings (A) at front of seat back, and then remove the seat back cover from seat back.

Remove the connecting wire (A), and then loosen the bolts and nuts to remove slide rail.

Remove the inner belt.

Remove the hook (A), and then remove the seat cushion frame.

Remove the hog rings (A), and then remove the seat cushion cover from seat cushion pad.

Open the zipper at bottom of headrest, and then remove the headrest cover from headrest.

PASSENGER’S SEAT

Remove the seat from vehicle.

Remove the reclining lever and seat hinge cover outer.

Remove the seat hinge cover inner.

Remove the bolts from reclining hinge on each side.