30 20 971 Screw-thread paste
|
30 20 971 Screw-thread paste
|
Molykote 1000. 100 gram tube.
For lubrication of parts such as the valve guide in the turbo unit.
1
No restrictions apply when transporting this product.
Product information sheet
|
1.
|
NAME OF PRODUCT AND COMPANY
Product name
|
Molykote 1000 Paste
|
Use
|
Lubricant
|
Part no.
|
MP1000
|
Manufacturer - supplier
|
G.A. LINDBERG AB
Box 6044
SE-164 06 KISTA
www.galindberg.se
Tel. +46 8 703 02 00
Fax +46 8 751 40 41
|
|
2.
|
COMPOSITION / SUBSTANCE CLASSIFICATION
Ingredients
|
CAS no.
|
Contents
|
FM
|
FB
|
FH
|
R-phrases
|
Distillates (petroleum), solvent-dewaxed light paraffinic
|
64742-56-9
|
<=42
|
|
|
T
|
45
|
Distillates (petroleum), solvent-dewaxed heavy paraffinic
|
64742-65-0
|
<=42
|
|
|
T
|
45
|
Calcium fluoride
|
7789-75-5
|
22
|
|
|
|
|
Copper
|
7440-50-8
|
8
|
|
|
|
|
Polybutene
|
9003-29-6
|
6
|
|
|
|
|
Explanation of codes
|
FB/FH/FM = Danger code for fire/health/environment (respectively)
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = No marking required
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
3.
|
DANGEROUS PROPERTIES
The product has no dangerous properties in accordance with KIFS 1994:12 and its modifications.
|
4.
|
FIRST AID
Inhalation
|
No special action.
|
Skin
|
Dry the skin with paper towels or the like.
|
Eyes
|
Rinse with water.
|
Consumption
|
First aid not necessary.
|
Health check
|
Normal health check.
|
|
5.
|
IN THE EVENT OF FIRE
Suitable extinguishing agents
|
Water, foam, carbon dioxide and powder.
|
Fire/explosion risks
|
Poisonous fumes may develop.
|
Protective equipment for fire fighters
|
Mask covering entire face and protective clothing is to be worn.
|
Other information
|
Reservoirs near any fire should be moved or cooled with water. Follow emergency routines if the area must be evacuated or isolated.
|
|
6.
|
IN THE EVENT OF A SPILL / ACCIDENTAL RELEASE
Personal measures
|
Use personal protective equipment as described in point 8.
|
Measures to protect the environment
|
Do not allow large quantities to run down into drains or water systems.
|
Sanitation methods
|
Scrape together, gather and place in lockable container.
|
Other information
|
NOTE: If the product is spilled, it makes the surface extremely slippery.
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
Avoid contact with skin and eyes.
|
Storage directives
|
Do not store with oxidants. Store the container well sealed. Store dry. Good ventilation is absolutely necessary. Local exhaust ventilation is recommended.
|
|
8.
|
EXPOSURE LIMITATION / PERSONAL PROTECTIVE MEASURES
Technical measures
|
Ventilation must be efficient. Limit values must not be exceeded and the risk of inhalation of fumes and mist shall be minimised.
|
Chemical designation
|
Limit value
|
Distillates (petroleum), solvent-dewaxed light paraffinic (recommendation)
|
5 mg/m³
|
Distillates (petroleum), solvent-dewaxed heavy paraffinic (recommendation)
|
5 mg/m³
|
Calcium fluoride (recommendation)
|
2.5 mg/m³
|
Copper
|
1 mg/m³
|
Polybutene
|
5 mg/m³
|
Breathing protection mask
|
A suitable breathing protection mask should be used if the product is used extensively, in a confined space or if there is a chance that the occupational hygienic limit value will be reached or exceeded.
|
Eye protection
|
Protective goggles are to be worn.
|
Protective gloves
|
Protective gloves are to be worn if there is a risk or direct contact or splashing.
|
Other information
|
Practice good industrial hygiene. Wash your hands after handling, especially before eating, drinking or smoking.
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/condition
|
paste
|
Smell
|
weak
|
Colour
|
brown
|
Solubility
|
|
Melting point
|
|
Boiling point
|
|
Density
|
1.26 g/cm
3
|
Flash point
|
200 °C
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Stable under normal conditions.
|
Reacts with
|
Can react with strongly oxidizing substances.
|
Dangerous decomposing products
|
Silica. Carbon monoxide and traces of incompletely burned carbon products. Toxic fumes from fluorine compounds. Metal products. Nitrous oxides. If this product is heated over 150 °C, small amounts of formaldehyde may be released.
|
Other information
|
Formaldehyde fumes that can be released at high temperatures are harmful when inhaled and irritate the eyes and air passages at concentrations under 1 ppm.
|
|
11.
|
TOXICOLOGIC INFORMATION
Inhalation
|
Normally, no harmful effects are expected. Formaldehyde fumes that can be released at temperatures greater than 150 degrees are harmful when inhaled and irritate the eyes and air passages at concentrations under 1 ppm.
|
Skin
|
Prolonged, repeated contact can dry out the skin and cause skin damage.
|
Eyes
|
Mildly irritating.
|
Consumption
|
Small amounts transferred from the hands to the mouth are not harmful. Ingestion of large amounts may produce nausea.
|
|
12.
|
ECOTOXICOLOGICAL INFORMATION
Mobility
|
Fixed material; insoluble in water. No negative effects expected.
|
Bioaccumulation
|
No risk of bioaccumulation
|
Ecotoxicity
|
No harmful effects to water organisms. No harmful effects to bacteria.
|
|
13.
|
WASTE MANAGEMENT
Waste management
|
Product and packaging waste is handled in accordance with local regulations.
|
|
14.
|
TRANSPORT INFORMATION
Road (ADR)
|
UN no.
Dangerous goods
Marg no.
|
Class:
free
|
Label
Danger no.
|
Rail (RID)
|
UN no.
|
Class:
free
|
Label
Danger no.
|
Sea (IMDG)
|
UN no.
Class:
free
|
Page
Label
|
Pack. gr:
|
IATA (air)
|
UN no.
|
Class:
free
|
Label
|
Other transport information
|
Not dangerous goods according to transport regulations.
|
|
15.
|
APPLICABLE REGULATIONS
R-phrases
|
|
|
S-phrases
|
S-24/25
|
Avoid skin and eye contact.
|
|
S-41
|
Avoid inhalation of smoke in the event of fire or explosion.
|
Other information
|
No ozone-destroying chemicals are in or were used in production.
|
|
16.
|
OTHER INFORMATION
Information sources
|
This product information sheet has been produced in accordance with commission directives 93/112/EEG, 67/548/EEG and 88/379/EEG and relevant modification, legal applications as well as regulations and directives regarding classification, packaging and marking or dangerous substances and preparations.
|
General data
|
This information applies only to the above named product and does not necessarily apply if it is used together with one or more products or in another process. To the best of our knowledge, this information is correct, complete and given in good faith, but without guarantee. The user is responsible for insuring that the information is relevant and complete as regards his or her own use of this product.
|
Replaces
|
1998-02-10
|
Issued
|
2002-01-27
|
|