49 04 090 Adhesive

49 04 090 Adhesive

Specifications

Loctite 638. 3 ml tube.

Saab application

For sealing of clutch slave cylinder against the gearbox on Saab 900 Sensonic and Saab 9000 M92- from gearbox number D41693.

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives

The product is hazardous to personal health. Harmful in case of skin contact. Irritates eyes and skin. Risk of serious eye injuries. May cause allergic reactions in case of skin contact. In case of eye contact, flush immediately with plenty of water and call a physician. In case of skin contact, wash immediately with soap and water.

Use Loctite dosage equipment in order to avoid contact with eyes and skin.

Material safety data sheet

1.	IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product code 0120638 Product name 638 Manufacturer - supplier Loctite Sweden AB Box 8823 SE-402 71 GÖTEBORG Tel: +46 31 7505400 Fax: +46 31 7505391 Tel (emergencies): +353-1-4599301 / +353-87-2629625 / +353-1-4046444

2.

COMPOSITION/INFORMATION ON INGREDIENTS Product type Acrylate adhesive Ingredient CAS-no. Conc. R-phrases Classification 1-acetyl-2-phenylhydrazine 114-83-0 0.10 - 1.00 R20/21/22, R40, R38, R43 Xn Hydroxypropyl methacrylate 27813-02-1 15.00 - 30.00 R36, R43 Xi Acrylic acid 79-10-7 5.00 - 15.00 R10, R21/22, R35, R50 C Methacrylic acid 79-41-4 0.10 - 1.00 R34 C Cumene hydroperoxide (80%) 80-15-9 1.00 - 3.00 R7, R21/22, R23, R34, R48/20/22, R51/53 C, O Key FB/FH/FM = Hazard code for fire/health/environment T+ = Very toxic T = Toxic C = Corrosive Xn = Harmful Xi = Irritant V = Moderately harmful IK = Not subject to labelling E = Explosive O = Oxidizing F+ = Extremely flammable F = Highly flammable N = Dangerous for the environment

3.	HAZARDS IDENTIFICATION Harmful in contact with skin. Risk of serious damage to eyes. May cause sensitization by skin contact.

4.

FIRST AID MEASURES Inhalation Low volatility. In case of discomfort, move to fresh air. Skin Wash with soap and water. If irritation persists, seek medical advice. Eyes Rinse immediately with plenty of water for at least 15 minutes. If irritation persists, seek medical attention. Ingestion Rinse mouth with water then give plenty of water to drink. Do not induce vomiting. Seek medical advice.

5.

FIRE-FIGHTING MEASURES Suitable extinguishing media Non-flammable product (flash point >100°C). If product is involved in fire extinguish with dry powder, foam or carbon dioxide. Fire/Explosions risks Trace amounts of toxic fumes may be released on incineration. Protective equipment Use respiratory equipment.

6.	SPILLAGE/ACCIDENTAL RELEASE MEASURES Methods for cleaning up Confine the spillage with sand, earth or the like, and place in a closed container, which should be partially filled (air space), for disposal.

7.

HANDLING AND STORAGE Advice for safe handling Loctite applicators are recommended to minimize skin and eye contact, particularly where workers are handling sharp or threaded parts which might result in microlaceration of sensitive areas of the skin. Avoid contact with skin and eyes. Adequate ventilation is recommended to remove traces of odour. Storage instructions Store in original containers at 8°C-21°C and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product.

8.

EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational exposure limits. Chemical identity Limit value (SE) Acrylic acid NGV 10ppm 8h TWA KTV 15ppm (45mg/m3) 15 min Use of Loctite applicator equipment is recommended. When handling large quantities wear polyethene or polypropene gloves and eye protection.

9.	PHYSICAL AND CHEMICAL PROPERTIES Form/state Liquid Odour Sharp Colour Green Flash Point (PMCC) >100°C Solubility in water Insoluble Solubility in acetone Miscible Density 1.05 kg/m³ Vapour pressure Less than 3 mm Hg at 20°C

10.	STABILITY AND REACTIVITY Stability Destabilized by reducing agents. Non-reactive with Water or oxidizing agents except for peroxides.

11.	TOXICOLOGICAL INFORMATION Inhalation Low volatility. Low risk that harmful vapours are liberated. Skin Harmful in contact with skin. This product is sensitizing to skin. Eyes May cause damage to eyes. Ingestion This product is considered to be of low toxicity. Acute oral (rat) >5000mg/kg.

12.	ECOLOGICAL INFORMATION Ecotoxicity Does not contain any substances listed on the Montreal protocol.

13.	DISPOSAL CONSIDERATIONS Disposal considerations Dispose of in accordance with local and national regulations. Standard procedures for 'water insoluble' non-toxic chemicals recommended.

14.	TRANSPORT INFORMATION UN-no. None Air (IATA) Not classified Sea (IMO) Not classified Road/Rail (ADR/RID) Not classified

15.

REGULATORY INFORMATION Contains Hydroxypropyl methacrylate and acrylic acid Hazard class Harmful R-phrases R21 Harmful in contact with skin. R41 Risk of serious damage to eyes. R43 May cause sensitization by skin contact. S-phases S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of soap and water. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.

16.

OTHER INFORMATION The information in this material safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product(s) described herein. Attention of users is drawn to the possible hazards from improper use of the product(s). Material safety data sheet revised 1999-10-29 For more information Loctite Corporation, International Health and Regulatory Affairs, Tallaght Business Park, Whitestown, Dublin 24, Ireland. Tel: +353-1-4046585 Fax: +353-1-4510806 Produced by Caroline Walsh MSc HRA Specialist Health & Regulatory Affairs - Europe