74 96 276 Cylindrical fastening
|
74 96 276 Cylindrical fastening
|
Loctite 648. Locking fluid,
high temperature
.
Strong
. NOTE! Must not be used together with aluminium. 50 ml bottle.
Splines front wheel hub Saab 9000. Thread locking compound for lock nut on universal joint Saab 9000 and Saab 99/90/900 -M93 pinion nut, outer universal joint.
1
No restrictions apply when transporting this product.
The product is an irritant. May irritate the eyes and skin. In case of splash in eyes, flush with plenty of water and contact a physician. In case of skin contact, wash immediately with soap and water.
Use Loctite dosage equipment in order to avoid contact with eyes and skin.
Material safety data sheet
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product code
|
0120648
|
Product name
|
648
|
Manufacturer - supplier
|
Loctite Sweden AB
Box 8823
SE-402 71 GÖTEBORG
Tel: +46 31 7505400
Fax: +46 31 7505391
Tel (emergencies): +353-1-4599301 / +353-87-2629625 / +353-1-4046444
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Product type
|
Acrylate adhesive
|
Ingredient
|
CAS-no.
|
Conc.
|
R-phrases
|
Classification
|
Cumene hydroperoxide
|
80-15-9
|
1.00 - 2.00
|
R7, R20/22, R34
|
C, O
|
1-acetyl-2-phenylhydrazine
|
114-83-0
|
0.01 - 1.00
|
R20/21/22, R40, R38, R43
|
Xn
|
3-methacryloxypropyltrimethoxysilane
|
2530-85-0
|
0.10 - 1.00
|
R38, R36/38
|
Xi
|
Hydroxypropyl methacrylate
|
27813-02-1
|
5.00 - 10.00
|
R21, R41, R43
|
Xn, Xi
|
Acrylic acid
|
79-10-7
|
5.00 - 10.00
|
R10, R34
|
C
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
3.
|
HAZARDS IDENTIFICATION
Irritating to eyes and skin. May cause sensitization by skin contact. Risk of serious damage to eyes.
|
4.
|
FIRST AID MEASURES
Inhalation
|
Low volatility. In case of discomfort, move to fresh air.
|
Skin
|
Take off contaminated clothing immediately. Immediately wash skin thoroughly with soap and water. Continue to wash for at least 15 minutes. Seek medical advice.
|
Eyes
|
Flush eyes immediately with plenty of water for at least 15 minutes. Seek medical attention immediately.
|
Ingestion
|
Rinse mouth with water then give plenty of water to drink. Do not induce vomiting. Seek medical advice.
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Non-flammable product (flash point >100°C). If product is involved in fire extinguish with dry powder, foam or carbon dioxide.
|
Fire/Explosions risks
|
Trace amounts of toxic fumes may be released on incineration.
|
Special protective equipment for firefighters
|
Use respiratory equipment.
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Wear eye protection, gloves and protective clothing.
|
Methods for cleaning up
|
Confine the spillage with sand, earth or the like, and place in a closed container, which should be partially filled (air space), for disposal.
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
Loctite applicators are recommended to minimize skin and eye contact, particularly where workers are handling sharp or threaded parts which might result in microlaceration of sensitive areas of the skin. Avoid contact with skin and eyes. Adequate ventilation is recommended to remove traces of odour.
|
Storage instructions
|
Store in original containers at 8°C-21°C and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product.
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Chemical identity
|
Limits (SE)
|
Acrylic acid
|
NGV 10ppm 8h TWA.
KTV 15ppm (45mg/m3) 15min.
|
Precautions
|
Avoid contact with skin and eyes. Wear suitable protective clothing.
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Liquid
|
Odour
|
Sharp
|
Colour
|
Green
|
Vapour pressure
|
Less than 3 mm Hg at 20°C
|
Solubility in water
|
Insoluble
|
Solubility in acetone
|
Miscible
|
Density
|
1.05 kg/m
3
|
Flash Point (PMCC)
|
>100 °C.
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Destabilized by reducing agents.
|
Non-reactive with
|
Water or oxidizing agents except for peroxides.
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
Low volatility. Low risk that harmful vapours are liberated.
|
Skin
|
Irritating and sensitizing by skin contact.
|
Eyes
|
May cause damage to eyes. Irritating to eyes.
|
Ingestion
|
Ingestion of a large quantity may present a significant risk.
|
|
12.
|
ECOLOGICAL INFORMATION
Ecotoxicity
|
Does not contain any substances listed on the Montreal protocol.
|
|
13.
|
DISPOSAL CONSIDERATIONS
Disposal considerations
|
Dispose of in accordance with local and national regulations. Standard procedures for 'water insoluble' non-toxic chemicals recommended.
|
|
14.
|
TRANSPORT INFORMATION
UN-no.
|
None
|
Air (IATA)
|
Not classified
|
Sea (IMO)
|
Not classified
|
Road/Rail (ADR/RID)
|
Not classified
|
|
15.
|
REGULATORY INFORMATION
Contains
|
Hydroxypropyl methacrylate and acrylic acid.
|
Hazard class
|
Irritant
|
R-phrases
|
R36/38
|
Irritating to eyes and skin.
|
|
R41
|
Risk of serious damage to eyes.
|
|
R43
|
May cause sensitization by skin contact.
|
S-phases
|
S24
|
Avoid contact with skin.
|
|
S26
|
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
|
S28
|
After contact with skin, wash immediately with plenty of soap and water.
|
S-phases
|
S36/37/39
|
Wear suitable protective clothing, gloves and eye/face protection.
|
|
16.
|
OTHER INFORMATION
The information in this material safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product(s) described herein. Attention of users is drawn to the possible hazards from improper use of the product(s).
Material safety data sheet revised
|
2000-08-14
|
For more information
|
Loctite Corporation, International Health and Regulatory Affairs, Tallaght Business Park, Whitestown, Dublin 24, Ireland.
Tel: +353-1-4046444
Fax: +353-1-4510806
|
Produced by
|
Caroline Walsh MSc HRA Specialist Health & Regulatory Affairs - Europe
|
|