Engine suspension front left
|
Engine suspension front left
|
1.
|
Remove the engine cover, place lifting beam 83 94 850 above the engine and hook on the front left lifting eye. Lift the engine until the strain is taken off the engine mounting.
|
2.
|
Raise the car, remove the lower cover and the left-hand air shield.
|
3.
|
Undo the centre bolt on the engine mounting.
|
4.
|
Undo the remaining bolts and remove the engine mounting.
|
1.
|
Fit the engine mounting to the bracket on the gearbox. Do not tighten the centre bolt.
|
2.
|
Tighten the engine mounting to the body.
Tightening torque: 62 Nm (46 lbf ft).
|
3.
|
Tighten the centre bolt on the engine mounting.
Tightening torque: 47 Nm (35 lbf ft).
|
4.
|
Fit the cover and air shield, and lower the car.
|
5.
|
Remove the lifting beam and refit the engine cover.
|