Valve seats
| Valve seats |
| 1. |
If the valve seat has to be machined, use T-spanner 78 61 065 and guide shaft 83 95 097.
|
|
| 2. |
First mill the valve seat 45° using valve seat cutter 78 61 040. Then mill the correction angle 60° using valve seat cutter 83 93 936. The width of the valve seat should be 1.4 - 1.8 mm for both inlet and exhaust valves.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
