SAAB WIS ONLINE

Front engine mountings

Front engine mountings


To remove


1. Raise the car and remove the front wheel on the side of the car on which the engine mounting pad is to be replaced.

2. Remove the wheel arch liner and air shield and place a jack under the engine or gearbox.

3. Unscrew the bolts holding the mounting pad to the body.

4. Lower the engine slightly and remove the mounting pad from its bracket.


To fit



1. Fit the engine mounting pad to the mounting.

Tightening torque: 39 Nm (29 lbf ft)

2. Raise the engine and tighten the mounting pad on the body. Remove the jack.

Tightening torque: 73 Nm (54 lbf ft)

3. Fit the air shield and wheel arch liner.

4. Fit the wheel and tighten the bolts.

Tightening torque: 120 Nm (89 lbf ft).

5. Lower the car to the floor.