Oil filter adapter housing
|
|
Oil filter adapter housing
|
|
1.
|
Raise the car and remove the right-hand air shield.
|
|
2.
|
Detach the oil hoses from the adapter housing and the oil pipe from the turbocharger (turbo). Remove the oil filter.
|
|
3.
|
Remove the adapter housing.
|
|
2.
|
Lubricate the seal and fit the adapter housing.
|
|
3.
|
Connect the oil seals and the pipe to the turbocharger (turbo).
Tightening torque: 8 Nm (5.9 lbf ft)
|
|
4.
|
Make sure the oil plug is tight, fit the oil filter and the air shield. Lower the car.
Tightening torques:
Oil filter: 10 Nm (7.4 lbf ft)
|
|
5.
|
Fill up with motor oil, warm up the engine and check for leaks.
|
