SAAB WIS ONLINE

Valve guides

Valve guides

To remove


(from the cam side)

Pull out the valve guides in the direction of the arrow with (1) press, part no. 83 90 494, (2) sliding hammer, part no. 83 93 811, (3) spacer sleeve, part no. 83 93 829, and (4) nut, part no. 83 93 845. The valve guide is no. (5).

To fit


Note

To make fitting easier, heat the cylinder head with warm water and cool the guides.



1. Insert the guides from the cam side, position the sliding hammer from the valve seat.

2. Centre the tool in the valve seat and fit the guide in the direction of the arrow. Use (1) press, part no. 83 90 494, (2) sliding hammer, part no. 83 93 811, (3) end stop, part no. 83 93 837, (4) centring sleeve, part no. 83 90 379 and (5) nut, part no. 83 93 845. The valve guide is no. (6).

3. Rough ream the guide with the tool, part no. 83 93 944, and finish ream with a 7.0 mm H7 reamer.