SAAB WIS ONLINE

Fuel pump, auxiliary heater

Fuel pump, auxiliary heater

Warning

Removal of the fuel filter involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection with this work:



Work only in a well-ventilated area! If approved equipment for the extraction of fuel vapours is available, be sure to use it.

Wear suitable gloves! Prolonged contact with fuel can cause skin irritation or dermatitis.

Keep a class BE fire extinguisher near at hand! Be mindful of the danger of sparks caused by short circuits and when connecting and disconnecting leads in electrical circuits.

Smoking is strictly prohibited.


To remove



1. Raise the car and position a container under the fuel filter bracket.

2. Remove the protective cover in front of the fuel filter.

3. Remove the fuel pump.


4. Remove the connector and fuel lines from the pump.


To fit



1. Replace the rubber mounting.

2. Plug in the connector and fit the fuel lines to the pump.

3. Fit the fuel pump.

4. Fit the protective cover, connect the exhaust to the engine and auxiliary heater exhaust pipe and lower the car.


5. Start the engine and start the auxiliary heater using the diagnostics tool. Check heater function.