SAAB WIS ONLINE

Coolant

Coolant

Changing



1. Unscrew the drain plug and drain the coolant. Remove the expansion tank filler cap to speed this up.

2. Tighten the drain plug finger-tight.

3. Mix equal amounts of Saab Original Coolant and water in a clean receptacle.

Important

This is important and ensures that sufficient cooling performance will be obtained even in a hot climate.


4. Fill up and bleed the system as follows:

Note

A/C and ACC must be OFF.


Fill the system up to the MAX level, fit the pressure cap, start the engine and warm it up at varying rpm until the radiator fan starts.

Switch off the engine and top up as necessary to the MAX level.

5. Screw on the expansion tank cap.