Radiator fan
| Radiator fan |
Warning
| 1. |
Disconnect and remove the battery.
|
|
| 2. |
Unplug the radiator fan electric connections.
|
|
| 3. |
Detach the servo pump's oil pipe and the clips for the radiator's venting hose from the radiator crossmember and bend the oil pipe aside.
|
|
| 4. |
Remove the radiator fan cowling (2 bolts) and lift it up.
|
|
| 5. |
Undo the nuts securing the radiator fan to the fan cowling, remove the resistor (2-speed radiator fan), detach the connectors from the fan cowling and remove the fan.
|
|
| To fit |
| 1. |
Fit the radiator fan into correct position in the fan cowling and tighten down with the nuts.
|
|
| 2. |
Press the connectors onto the fan cowling and fit the resistor (2-speed radiator fan).
|
|
| 3. |
Position the radiator fan cowling on the radiator and tighten the 2 bolts.
|
|
| 4. |
Plug in the radiator fan connectors.
|
|
| 5. |
Fit and reconnect the battery.
Set the clock to the right time. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
