SAAB WIS ONLINE

Control valve, exhaust gas recirculation

Control valve, exhaust gas recirculation

To remove



1. Undo the power steering fluid reservoir and put it to one side.

2. Slightly loosen the screws securing the control valve bracket and lift up the bracket.

3. Unplug the connector and vacuum hose on the control valve.

Important

Note the position of the hoses.


4. Remove the EGR control valve from the bracket.


To fit



1. Fit the EGR control valve on the bracket.

Tightening torque 4 Nm (3 lbf ft).

2. Plug in the connector and connect the vacuum hoses in their previous positions.

3. Fit the control valve bracket.

4. Put back the power steering fluid reservoir.