P0110, P0111
Read the instructions below then
start the fault diagnostic procedure.
Symptom: No symptoms.
P0110
Intake Air Temperature Sensor Circuit. Short to B+ / Open Circuit.
P0111
Intake Air Temperature Sensor Circuit. Short to Ground.
Fault symptom
Conditions
The following conditions apply for the DTC in question:
•
|
P0110:
Voltage on control module sensor input exceeds 4.7 V for 0.6 seconds.
|
•
|
P0111:
Voltage on control module sensor input is below 0.3 V for 0.6 seconds.
|
Diagnostic help
P0110:
The control module uses 20°C (68°F) as a substitute value. The reading on the diagnostic tool is -50°C (122°F).
P0111:
The control module uses 20°C (68°F) as a substitute value. The reading on the diagnostic tool is 200 °C (392°F).