P1610 , P1611 , P1614
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Engine will not start. Crankshaft does not turn.
P1610
Immobilizer Code not programmed
P1611
Immobilizer Wrong security Code
P1614
Wrong Transponder response from TWICE
Fault symptom
•
|
Engine will not start. Crankshaft does not turn.
|
Conditions
The following conditions apply for the DTC in question:
•
|
P1610:
Control module in delivery mode. Ignition switch in start position.
|
•
|
P1611:
Wrong security code in control module. Ignition switch in start position.
|
•
|
P1614:
Code exchange between TWICE, MIU and EDC incorrect. Ignition switch in start position.
|
Diagnostic help
P1611:
An attempt has been made to manipulate the immobilizer function. The VIN in the control module may be incorrect.
P1614:
Can be caused by a defective transponder or no transponder at all.