SAAB WIS ONLINE

Changing the service port

Changing the service port

Dismantling


1. Drive the car on to a lift and raise it.


2. Open the bonnet.

3. Detach the purge hose with the service port from the rubber hose on the EVAP purge valve.

4. Detach the purge line from the securing clip.

5. Separate the service port from the line by carefully cutting off the purge hose with a sharp knife, scalpel, or similar tool.

Note

Cut the line so that the piece cut off is as short as possible.



To fit



1. Press the purge line on to the service port using tool 83 94 546.

2. Connect the service port to the rubber hose on the EVAP purge valve.


3. Secure the purge line with the clip.

4. Pressurize the system and check for any leaks in the service port installation.