SAAB WIS ONLINE

Fitting a service port

Fitting a service port

Dismantling


1. Drive the car on to a lift and raise it.


2. Open the bonnet.

3. Detach the purge line from the rubber hose on the EVAP purge valve.

4. Detach the purge line from the securing clip.


To fit



1. Press the purge line on to the service port using tool 83 94 546.

2. Connect the service port to the rubber hose on the EVAP purge valve.


3. Secure the purge line with the clip.

4. Pressurize the system and check for any leaks in the service port installation.