Hose, EVAP shut-off valve
|
|
Hose, EVAP shut-off valve
|
|
1.
|
Remove the air vent pipe from the car.
|
|
2.
|
Remove the shut-off valve and hose clamp from the hose.
|
|
3.
|
Remove the seal from the bottom end of the vent pipe.
|
|
4.
|
Hold on to the cable while pulling out the hose from the end of the shut-off valve.
|
|
1.
|
Apply a thin coat of petroleum jelly (vaseline) to the end of the hose.
|
|
2.
|
Insert the hose into the vent pipe until approx. 10 cm is remaining, making sure the cable does not follow.
|
|
3.
|
Fit the shut-off valve with cable and insert the valve and hose the remaining distance.
|
|
4.
|
Fit the white cover.
|
|
5.
|
Adjust the cables and fit the vent pipe's bottom seal.
|
|
6.
|
Fit the vent pipe on the car.
|
