Boost pressure control valve, exhaust emission recirculation
|
|
Boost pressure control valve, exhaust emission recirculation
|
|
1.
|
Loosen and move aside the power steering fluid reservoir.
|
|
2.
|
Slightly loosen the bolts that secure the boost pressure control valve bracket and lift up the bracket.
|
|
3.
|
Unplug the connector and disconnect the hoses from the boost pressure control valve.
|
Important
|
|
Note the position of the hoses.
|
|
|
|
|
4.
|
Remove the boost pressure control valve, exhaust recirculation from the bracket.
|
|
1.
|
Fit the boost pressure control valve, exhaust recirculation on the bracket.
Tightening torque 4 Nm (3 lbf ft).
|
|
2.
|
Plug in the connector and connect the hoses to their positions as they were before removing.
|
|
3.
|
Fit the boost pressure control valve bracket.
|
|
4.
|
Refit the power steering fluid reservoir.
|
