SAAB WIS ONLINE

Middle silencer

Middle silencer


Dismantling


1. Raise the car and loosen the exhaust pipe joints.

2. Bend out the metal tabs and remove the rubber mountings.


3. Lower away the silencer.


To fit



1. Clean the joints.

2. Offer up the new silencer and hook the new rubber mountings in place.

3. Tighten the joints.

Tightening torque 20 Nm (15 lbf ft).

Make sure that there is adequate clearance to parts next to the exhaust system.

4. Bend the metal tabs for the rubber mountings back into place and lower the car to the floor.