Mass air flow sensor
| Mass air flow sensor |
| 1. |
Unplug the mass air flow sensor connector.
|
|
| 2. |
Remove the hose clips.
|
|
| 3. |
Remove the mass air flow sensor.
|
|
| To fit |
| 1. |
Fit the mass air flow sensor with the arrow pointing towards the turbocharger. Make sure that the projecting tabs on the mass air flow sensor fit into the recesses in the rubber elbow on the air collector casing cover.
|
|
| 2. |
Fit the hose clips.
|
|
| 3. |
Plug in the mass air flow sensor connector.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
