Position sensor, camshaft
| Position sensor, camshaft |
| 1. |
Remove the distributor cap.
|
|
| 2. |
Unplug the connector.
|
|
| 3. |
Unscrew the retaining screws and remove the distributor with the camshaft position sensor.
|
|
| To fit |
| 1. |
Fit the distributor with the camshaft position sensor.
Attach the distributor with screws. Tightening torque: 18 Nm (13.3 lbf ft) |
|
| 2. |
Plug in the connector.
|
|
| 3. |
Fit the distributor cap.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
