Adjusting the throttle disc
| Adjusting the throttle disc |
| 1. |
Remove the engine cover.
|
|
| 2. |
Detach the turbo delivery pipe from the throttle body.
|
|
| 3. |
Check the throttle disc position by measuring the depth to the disc. The measurement should be the same on both sides of the throttle disc. Do not use a vernier caliper.
|
|
| 4. |
Adjust as necessary by loosening the 2 screws and then moving the bracket in the relevant direction.
|
|
| To fit |
| 1. |
Fit the turbo delivery pipe.
|
|
| 2. |
Fit the engine cover.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
