SAAB WIS ONLINE

Crankshaft position sensor

Crankshaft position sensor

The crankshaft position sensor is located at the flywheel end of the engine block.

To remove



1. Remove the engine cover.

2. Remove the turbo delivery pipe and plug the turbo delivery hose.

3. Free the sensor cable by unplugging the connector and removing the clips/cable ties.

Important

Note the position of the cable.


4. Detach the cable.

5. Remove the heat protection.

6. Unscrew the sensor retaining bolt and remove the sensor. Make a note of the position of the sealing ring.


To fit



1. Clean the sensor seating and fit the sensor with the sealing ring correctly positioned.

Tightening torque retaining bolt 8 Nm (5.9 lbf ft)

2. Refit the cable and secure it with clips/cable ties.

3. Plug in the connector.

4. Fit the turbo pressure pipe and engine cover.